•  GIA Staplers
  •  Skin Staplers
  •  Circular Staplers
  •  Ports
 
 
 
 
 
DST Series™ GIA™ Single Use Reloadable Staplers with Titanium Staples)
The GIA™ 60, 80 and 100 Reloadable Staplers place two double staggered rows of titanium staples and simultaneously cut and divide tissue between the two double rows. The GIA™ Reloadable Staplers and Single Use Loading Units (SULU) are available in the following lengths:
   • 60 mm
   • 80 mm
   • 100 mm lengths
 
The SGIA™ 60 Knifeless Stapler places two double staggered rows of titanium staples. The SGIA™ Knifeless Stapler is available in 60 mm only. The GIA™ Reloadable Staplers are available in three staple sizes to accommodate various tissue thicknesses:
   • 2.5 mm
   • 3.8 mm
   • 4.8 mm
The SGIA™ Knifeless Stapler is available in 3.8 mm staple size only. Please refer to the “SPECIFICATION CHART” for availability of staple sizes and cartridge lengths. Each GIA™ Reloadable Stapler may be reloaded up to 7 times for a total of 8 ?rings per instrument. The SGIA™ stapler is not reloadable.
     
 
 

The Autosuture™ GIA 50 PREMIUM™ single use loading unit (SULU) and the GIA 90 PREMIUM™ single use loading unit (SULU) places two, double staggered rows of stainless steel staples and simultaneously divides the tissue between the two, double rows.

The SGIA 50 PREMIUM™ and SGIA 90 PREMIUM™ single use loading unit's (SULU's) contain no knife and do not divide between the four rows of staples.

 
 
 
The stapler places two triple, staggered rows of titanium staples and simultaneously the knife divides the tissue in between. The instrument is designed for multiple use during a single surgical procedure: it can be reloaded up to 25 times for a total of 25 applications. The disposable loading unit can articulate at 22° and 45° in both directions by moving the proximal knob on the stapler.
 

The Autosuture™ ENDO GIA™ UNIVERSAL STAPLING SYSTEM stapler places two, triple-staggered rows of titanium staples and simultaneously divides the tissue between the two, triple-staggered rows. The size of the staples is determined by the selection of the 2.0 mm, 2.5 mm, 3.5 mm or 4.8 mm single-use loading unit (SULU). The ENDO GIA™ UNIVERSAL STAPLING SYSTEM stapler will accommodate any of the SULU sizes that are available in the 30 mm, 45 mm and 60 mm lines

 
     
     
 
Copyright © 2007 www.atmsindia.in | All Rights Reserved